Commercial Garage Door Repair Greater Boston & Surrounding Areas

In our core service area inside Route 128 (Cambridge, Somerville, Newton, Brookline, Arlington, Medford, Watertown, Belmont), we typically dispatch within two hours, day or night. Out toward Worcester, the South Shore, North Shore, and into southern New Hampshire and northern Rhode Island, we're usually on-site within three to four hours. We carry common commercial parts (gears, sensors, springs, cables, rollers, weather seals) so most emergency calls are resolved in one visit.

Yes. Rolling steel curtain doors are common at warehouses, self-storage facilities, fire stations, and older industrial buildings throughout greater Boston. We service the curtain itself, the barrel and counterbalance, the guides, the bottom bar, the operator (manual chain, electric, or jackshaft), and the locking hardware. If the curtain is damaged beyond repair, we can usually source a replacement within a week.

A typical commercial maintenance visit runs $300 to $800 depending on the number of doors and what we're inspecting. A standard contract for a small business with 1 to 3 commercial doors usually costs $1,200 to $2,400 per year for quarterly visits, which includes all inspection, lubrication, hardware tightening, sensor and safety testing, and documentation. Most parts under $50 (rollers, weather strip, hinges) are typically included. Larger commercial parts like springs and openers are billed separately if needed.

Yes. We schedule commercial repairs around your operations whenever possible. We can come in evenings, weekends, or overnight. After-hours rates are higher than standard daytime service, but for most commercial customers the math works out heavily in favor of keeping the loading dock running during business hours.

First, we secure the opening (often by manually closing the door and locking it down) so you stop losing heat or product. Then we diagnose - typical causes are a broken spring, a snapped chain on the operator, a failed motor, or a tripped breaker. We carry common operator parts so most problems are fixed same-visit. If you have refrigerated storage, we prioritize this call and try to be there within an hour in our core service area.

Yes. Municipal work has additional documentation requirements (proof of insurance, prevailing wage in some cities, after-hours coordination) and we handle all of it. We service fire station bay doors, DPW garage doors, transit maintenance facility doors, and similar municipal installations across MA, NH, and RI. We understand that a stuck fire station door is not an inconvenience, it's an emergency.

Commercial doors are heavier, taller, and cycle more often, so they use different springs - typically larger diameter, heavier wire, and rated for 25,000 to 100,000 cycles instead of the residential 10,000. Commercial spring replacement runs $400 to $1,200 per spring depending on size. The work is also more dangerous because of the spring load. This is firmly professional-only territory.

Yes. We replace old chain-hoist or jackshaft operators with modern LiftMaster or Chamberlain commercial operators that include modern safety features (monitored photoeyes, soft-start/soft-stop, automatic shutoff on jam), remote monitoring, and integration with your existing access control or alarm system. A typical commercial operator upgrade runs $1,200 to $3,500 installed depending on door size and features. Most of our customers see the payback in reduced downtime within 18 months.